22016 RecFieldMultSort Error 31: Too many sort fields.
22017 Error 9999: General Read/Write Failure.
22019 There is insufficient disk space to perform this operation.
22020 Insufficient memory to perform this operation.
22021 HP Palmtop WARNING
22022 The following HP Palmtop limits were exceeded:\n\n
22023 More than 4000 contacts per database.\n
22024 More than 400 activities per database.\n
22025 More than 8000 bytes per contact.\n
22026 More than 80 activities per contact.\n
22027 More than 80 history entries per contact.\n
22028 Do you wish to download ACT! data created from\nyour previous attempt?
22029 Deferred Database Files Found
22030 ACT! will attempt to enable the mouse driver. Replace the HP Palmtop connectivity cable with the mouse cable and press ENTER.
22031 The selected COM port is currently in use by the mouse driver!\nDo you want to use the selected COM port anyway?
22032 COM PORT CONFLICT!
22033 ACT! will attempt to temporarily disable the mouse driver. Replace the mouse cable with the HP Palmtop connectivity cable. Press ENTER to disable mouse driver.
22034 If your mouse is not active you will need to exit ACT! and Windows. Make sure your mouse cable is attached then load Windows and ACT!.
22035 The selected COM port is being used by a modem. Select another COM port.
22036 Error 9950: General Read/Write Failure.
22037 Error 9951: General Read/Write Failure.
22038 Error 9952: General Read/Write Failure.
22039 Error 9953: General Read/Write Failure.
22040 Error 9954: General Read/Write Failure.
22041 Error 9955: General Read/Write Failure.
22042 Error 9956: General Read/Write Failure.
22043 Error 9957: General Read/Write Failure.
22044 Error 9958: General Read/Write Failure.
22045 Error 9959: General Read/Write Failure.
22046 Error 9960: General Read/Write Failure.
22047 Error 9961: General Read/Write Failure.
22048 Error 9962: General Read/Write Failure.
22049 Error 9963: General Read/Write Failure.
22050 Error 9964: General Read/Write Failure.
22051 Error 9965: General Read/Write Failure.
22201 The selected device is not recognized.
22202 The selected baud rate is not supported\nby the selected device.
22203 The selected byte size rate is not supported\nby the selected device.
22204 The default parameters for this device are invalid.\nPlease check configuration.
22205 Unable to allocate memory for communication.
22206 The selected port is already in use by another application or is not present on your system.
22207 The input/output buffer has been overwritten.